Programmer BULL Central TDC 100 / 200 stations

Name: Programmer BULL Central TDC 100 / 200 stations
Brand: TORO
SKU: varias-programa-toro-central-tdc
Price: 2579.70 EUR
Availability: InStock

TORO

€2,579.70

Tax included

System of low energy consumption and highly profitable for the irrigation of commercial installations of large dimensions. Of 100 to 200 stations.

Using two-wire cables to communicate with set-top boxes buried system, the TDC eliminates the high costs associated with the wiring of the valves, the ditches and the location of problems in traditional systems.

Stations

Consultar sobre este producto

¿Dudas, disponibilidad o presupuesto? Escríbenos y te respondemos.

If you are looking for a system with low energy consumption and highly profitable for the irrigation of commercial installations of large dimensions, look at the Series TOC from Toro®.

- Modular controller up to 200 stations.
- Activate up to 20 solenoids at up to 4.5 km to the driver.
- 10 separate irrigation programs.
- Non-volatile memory requires no batteries and holds programming information for up to five years.

Models

CDEC-SA-100: 100 stations.
CDEC-SA-200: 200 stations.

SPECIFICATIONS

OPERATIONAL SPECIFICATIONS
• Overload protection of 20 KV with ground correct of 10 ohms or less on the programmer.
• Six start times per program.
• Programming for days of the week, days, odd/even, interval (1-31 days).
• Adjustment from 0-255% by controller, by program or by station.
• Exclusion of days (to remove a particular day from the standard program).
• Master valve and pump start programmable by station.
• Manual start of each station or entire program.
• Permanent memory that keeps the programming.
• Circuit self-diagnosis that disables the stations shorted/open.
• Confirmation of bidirectional activation of the decoder.
• Activate up to 20 solenoids at distances of up to 4.5 km
• Rain delay programmable up to 31 days.
• Calculator, from the window of water.
• Identification of zones alphanumeric of 10 digits.
• * * * Prepared for remote control, and compatible with rain sensors.
• Compatible with the central control system Sentinel®.
• Utilizes dc latching solenoids for controlling the valves.

SPECIFICATIONS ELECTRICAL

SPECIFICATIONS ELECTRICAL
Input power	120 VAC or 220/240 VAC (50/60 Hz)
Output stations	Up to 38 VAC; 3 amps maximum output
Route of two-wire cable	Twisted-pair shielded cable, 2.5 mm2 (14 AWG) up to 4572 m.
Route of two-wire cable	Twisted pair, shielded, 1.5 mm2 (16 AWG) up to 2576 m.
Wiring-decoder to solenoid	Standard pair, 2.5 mm2 (14 AWG) up to 122 m.

DIMENSIONS

DIMENSIONS
• Wardrobe: 356 mm x 330 mm x 152 mm (width x high x deep).

OPTIONAL ACCESSORIES

OPTIONAL ACCESSORIES
DEC-SG-LINE	Decoder, surge protector
102-4339SK	Expansion board 100 stations (daughter board)
TRS	RainSensor wiring
53853	Sensor rain/freeze wiring
TWRS/TWRFS	RainSensor or wireless sensor wireless rain/freeze
TMR-1-KIT	Remote maintenance Bull

FEATURES AND ADVANTAGES

New decoders ISP: Thanks to the protection against overloads of up to 20 kV, need less grounding in the field than competitive products.

Advanced diagnostics: The TDC provides two-way communications complete with each decoder, which allows you to verify communications with the field decoders and detect short circuits or solenoids open, allowing for maximum localization of problems.

Operating costs reduced: The decoders TOC use dc latching solenoids, which do not consume power when the valves are working.

Settings percentage: Adjustment percentage by controller, by program and by station (seasonal adjustment) 0% to 250% in increments of 1%.

Programming is simple and intuitive: Installation and maintenance are quick and simple thanks to the large LCD and the interface more intuitive in the industry.

MODULAR DESIGN

The base model of the TDC offers 100 stations with capability to easily add another module that allows you to control up to a maximum of 200 stations. This system is ideal for work staggered. The routes of cable are protected by individual breakers (4 for 100 workstations / 8 for 200 stations) provide protection to the controller in the event of a short circuit in the field wiring.

METAL CABINET FRONT OPENING WITH KEY

Supplied with steel cabinet with lock and key. Manufactured in sturdy metal with finish of powder coating, this wall cabinet provides superior protection against weather and vandalism.

ADJUSTMENT PERCENTAGE

The user can select a setting from 0 to 255% of the watering time programmed in 1% increments. You can change all the programs and stations in the same percentage, or adjust individual programs up or down.

SCREEN, SCHEDULED WATERING

In the Display of irrigation schedule, it is possible to select between a 14-day program that is repeated automatically, day watering odd/even, interval watering up to 31 days, or a different schedule for weekdays and weekends.

SCREEN CONFIGURATION OF STATIONS

The configuration screen of stations helps the user to assign codes. Each decoder has an address of 5 digits that is assigned to an individual station. You can also assign an alphanumeric name to 10 characters.

PROGRAM OF GROW -

The Program foundation is ideal for systems of new growth. The program ensures the irrigation of the new lawn when needed, and it is easy to adjust the TDC to measure that grow the grass and plants.

HOME SCREEN

The home screen always displays the current date and time and the next start time programmed. Also appear in the active stations, with clear indication of the irrigation time remaining. Show alarms for problematic areas, and it's easy to start a diagnostic analysis.

WATERING TIMES

Watering times can be adjusted by selecting a range of stations in a menu, instead of having to schedule them individually. You can also select the number of stations which must operate simultaneously.