Nozzles irrigation-MP Rotator for diffuser
Nozzles male thread and female. The MP Rotator is a mouthpiece of multiple jets incomparable. You can tap directly on any diffuser.
Why is so special the MP Rotator? What certainly distinguishes him is the uniformity of the precipitation. The precision of the design of jets, it provides outstanding coverage and excellent resistance to the wind.
Features:
- Excellent uniformity of all nozzles.
- Excellent behaviour to the action of the wind.
- Irrigation jets multiple, rotating.
- Low escorrentias to the unevenness.
- Three watering options for sectors of 90° to 210°; 210° to 270° and arches fixed of 360°.
- Built-in filter.
Specifications:
- Low rainfall and set the arc of irrigation (0.18 mm/min).
- Adjust the reach by 25%.
- Working pressure of 1.7 kg/cm2 3.7 kg/m2.
- Male thread 1/2".
Options
- Great uniformity
- The precision of the design of the jets deliver outstanding coverage and an excellent resistance to the wind.
- Low rainfall
- Reduces water runoff on slopes and compacted soils.
- Design tool flexible
- Range of 2.5 to 9 m: in the same area can be combined with all models.
- Precipitation adjusted automatically
- Even after adjusting the arc and radius.
- Durability and reliability proven
- Technology Rotator® proven in the agricultural market since 1987.
- Quick and easy adjustments for arc and radius
- Easy installation: no need to change nozzles.
Video - Adjust the Radius of the Nozzle MP Rotator
OVERVIEW
The revolutionary MP Rotator features with system of supply of water through jets rotating multitrayectoria that obtains excellent results in the saving of water. More than simply "spray" water , the MP Rotator supplied water jets rotating at a slow and steady pace. This rate of implementation slower allows the water to infiltrate gently into the soil and get an even distribution throughout the irrigated area. This increase in efficiency allows savings of 30% of water compared to the traditional warmers, and significantly reduces the losses by runoff. MP Rotator can be installed in any body of diffuser conventional, just change the nozzle, transforming it into a sprinkler, high uniformity and low rainfall adaptable to any industry and radio.
The MP Rotator is a great choice for new systems, as they offer huge flexibility of radio (2.5-10.7 m radius), decrease material costs and provide a better efficiency of the irrigation system. The MARKERS are also perfect to revitalize outdated systems: a replacement can fix the problems both for low pressure and poor coverage.
![]() |
UNIFORMITY OF DISTRIBUTIONThe streams of the MP Rotator reach all areas of the area irrigated with higher uniformity of the nozzles diffusing traditional, achieving greater coverage and efficiency. |
LOW PERCENTAGE OF RAINFALLThe majority of soils have an infiltration rate less than 25 mm/h, so that supply the irrigation with low flow rates is more efficient.The MP Rotator standard have pluviometrías of 10 mm/h and SR-series 20 mm/h. In both cases below the infiltration capacity of the soil, thus avoiding escorrentias and erosion. The combination of short radius and low flow make the MP SR the perfect solution for small areas. |
VIDEO - NOZZLE MP ROTATOR
VIDEO - NOZZLE MP ROTATOR
TABLE OF MODELS MP ROTATOR
MP1000 RADIUS OF 2.5 TO 4.6 M

MP1000-90-210 - Garnet
from 90° to 210°

MP1000-210-270 - light Blue
of 210° to 270°

MP1000-360-degree - olive Green
360°
MP2000 - RADIO 4-6.4 M

MP2000-90-210 - Black
from 90° to 210°

MP2000-210-270 - Green
of 210° to 270°

MP2000-360 degree - Red
360°
MP3000 - RADIO 6.7 TO 9.1 M

MP3000-90-210 - Blue
from 90° to 210°

MP3000-210-270 - Yellow
of 210° to 270°

MP3000-360 - Grey
360°
MP STRIPES - RADIUS OF 2.5 TO 4.6 M

LEFT CORNER - Ivory
1,5 x 4.6

CENTRAL STRIP / SIDE - Brown
1,5 x 9.1

RIGHT CORNER - Copper
1,5 x 4.6
MP CORNER / CORNER - RADIUS OF 2.4 TO 4.5 M

CORNER / CORNER - Turquoise
of 45° to 115°
*Note: These promo videos, MP ROTATOR, different from each other, and using in some cases accessories different or not included as standard.
**Note: Photos taken for promotional purposes. The images of the final product can be modified.


