Diffuser TORO irrigation 570 S (air)
To be used with any diffuser 570 MPR, bubbler jet or nozzle Maxijet®.
€1.20
Ideal for green areas relatively small. Bodies with seven different heights emergency and various interchangeable nozzles. Outlet female thread 1/2".
Available 5,1 - 7,6 - 10,2 - 15,2 - 30,5 cm of the height of the emergency.
Can be attached nozzles MPR fixed arc nozzles-T VAN arc adjustable.
Política de seguridad
Política de envío
Política de devolución
Versatile. Flexible. Reliable. The sprinkler Toro 570Z is all you need for residential installers, and maintenance that want to supply only a range of sprinklers.
Characterized by a sealing device active already at very low pressures, which allows the washing only during the phase of re-entry of the head, the models 570Z are ideal for small gardens and green areas.
Seven brackets of nozzles emerging different and a lot of interchangeable nozzles offer the user a possibility to use virtually unlimited.
Structures of different sizes, to meet the various requirements of installation, and the one hundred and fifteen different nozzles guarantee an extraordinary versatility. The head-ring ensures a tight arc easy and reliable.
The series 570Z is also ideal for areas of landscape complexes. The models PR and PRX are ideal for applications with operating pressure high or variable, that include long ducts and earrings. In the models ZXF and PRX, the device X-Flow reduces water leakage by 99% in case of damage.
The check valve (optional) able to support a height difference of 3 meters prevents emerging areas of low-rise continue to lose water at the end of the cycle of irrigation, creating wetlands and waste water.
OPERATIONAL FEATURES |
---|
• The flow rate of purge zero, which eliminates the loss of flow during the lift, allowing to place more diffusers in the same station or sector of irrigation. |
• Sealing of low pressure to 1 bar. |
• The purge of water in the retraction removes dirt and ensures a complete closure of the diffuser. |
• The black cap of small diameter (2") is less visible and reduces the chance of vandalism. |
• Accepts all of the nozzles diffusers Toro, including the nozzle burbujeadora 570 MPR, TVAN and low angle nozzles. |
• Accepts the nozzles Maxijet® for applications of low rainfall. |
• All bodies are supplied with a drainage plug for easy purging of the piping and an easy extraction of the stem of the diffuser. |
• The stem with ratcheting allows for easy reorientation of the irrigated arc. |
• Side-outlet models available 6" and 12" for sandy terrain or in applications with high variations of pressure. |
• Models with non-return valve with spring, high strength, to prevent drainage in low-lying areas and keep the pipes loaded (optional). |
• Made of plastic long-term. |
• Retraction spring made of stainless steel. |
• Available 5,1 - 7,6 - 10,2 - 15,2 - 30,5 cm of the height of the emergency. |
• Can be attached nozzles MPR fixed arc nozzles -T VAN arc adjustable. |
MODEL | 570 Z TORO |
---|---|
Spacing |
0,6-5,2 m (2'-17') |
Flow |
0,2-17 lpm (0.05-4.58 GPM) |
Recommended pressure |
of 1.4 to 3.5 bars |
Minimum operating working pressure for the model COM |
1.7 Bar (25 PSI) |
Maximum pressure |
5,2 bars |
Thread |
1/2"female |
Valve Check-O-Matic |
There is the possibility of installing a check valve X-FLOW to avoid the drainage in the low areas and keep the pipes loaded. Valve Check-O-Matic keeps a water column of 3 m (With the valve Check-O-Matic it is necessary to use the lower outlet.) |
Dimensions. Diameter of the body |
- 35 mm in bodies of 2", 3", 4" and 6"- IF - 41 mm in bodies of 300 mm - 44 mm on the bodies of 300 mm - IF |
Diameter of the cap | 50 mm (2") |
Side-outlet | 120 mm from the top of the diffuser to the center of the side-outlet |
Remains constant at 2.1 bar outlet pressure, thus minimizing misting and fogging caused by pressures above 2.1 bar.
Sealed, clean, no leaks
Prevents leaks when it emerges allowing you to install multiple diffusers in the same line.
The robust spring retraction and the sealing material improved to ensure excellent retraction of the head in all models 570Z.
The robust spring retraction and the sealing material improved to ensure excellent retraction of the head in all models 570Z.